• Light
    Dark
    Light
    Dark
Skip to content
Monotuerca
Monotuerca
Monotuerca Monotuerca
  • Brands
  • Vehicles
  • Events
  • About us
  • Contact
  • Brands
  • Vehicles
  • Events
  • About us
  • Contact

© 2016-2026 Colabrio. All rights reserved | Purchase

Security | Privacy & Cookie Policy | Terms of Service

  • 0.00€ 0
    Cart review
    No products in the cart.
Monotuerca
/
Vehicle Submodels
/
Chevron B16 Ford Cosworth FVC
Chevron B16 Ford Cosworth FVC

Brand

Chevron

Produced from

1969

Portal

Sports Cars

Vehicle category

Group 4, Group 6

Model line

Chevron B16

Predecessor

-

Sucessor

-
About this submodel
Read more

If the Chevron B16 FVA was the sprint-specialist that stunned the world on its debut, and the B16 BMW was the endurance workhorse that could hammer through 24 hours, the Chevron B16 Ford Cosworth FVC was the perfection of the formula. It was the “Goldilocks” car, the machine that combined the lightweight, high-revving DNA of a purebred racing engine with the displacement necessary to fight for overall victories in the fiercely contested European 2.0-Litre Sports Car Championship. By late 1969 and early 1970, the 2.0-litre class had become the most vibrant battleground in motorsport. The factory Abarths were getting faster, and Lola was readying its new T210. Derek Bennett, Chevron’s visionary founder, knew that the 1.6-litre FVA, despite its brilliance, was giving away too much torque to the opposition. The answer came from Northampton, in the form of Cosworth’s latest masterpiece: the FVC. 

The technical specification of the B16 FVC represents the zenith of the coupé’s development. The chassis remained Bennett’s signature tubular steel spaceframe—stiff, repairable, and communicative—clothed in that impossibly beautiful, low-drag fibreglass bodywork by Specialised Mouldings. But the transformation happened behind the driver’s bulkhead. The Cosworth FVC (Four Valve Type C) was a direct evolution of the FVA, but crucially, it was designed specifically for sports car racing rather than Formula 2. Bored out to 1,790cc (and later stretched by engine builders to 1.9 or even a full 2.0 litres), the FVC retained the gear-driven cams and 16-valve architecture of its smaller sibling but added the one thing the B16 lacked: mid-range punch. Producing upwards of 235-245 bhp, it was lighter than the iron-block BMW M10 and torquier than the FVA. It was a chaotic, vibrating, aggressive engine that turned the B16 from a momentum car into a true weapon, capable of powering out of corners and screaming to 9,000 rpm on the straights. 

In the hands of privateers, the B16 FVC became the standard-bearer for British engineering in 1970. While the factory teams had unlimited budgets, a well-sorted B16 FVC run by a team like Red Rose Racing or Worcester Racing could turn up at any circuit in Europe and challenge for the win. The car was particularly effective on the fast, flowing circuits that rewarded its aerodynamic efficiency and the FVC’s top-end power. At tracks like Thruxton, Spa-Francorchamps, and the Österreichring, the B16 FVC was a formidable sight, often splitting the 3.0-litre prototypes and embarrassing the heavier GT cars. It offered a driving experience of pure, unadulterated intensity; the solid-mounted Cosworth engine turned the cockpit into a resonating chamber of noise and vibration, connecting the driver directly to the machine’s mechanical soul. 

However, the B16 FVC also marked the end of an era. Even as it was winning races and hearts, the physics of motorsport were shifting. The FVC engine was potent, but it was expensive to run and rebuild compared to the BMW units. Furthermore, the weight penalty of the B16’s stunning coupé roof—some 40kg compared to an open car—was becoming a liability against the new generation of “barchetta” prototypes like the Lola T210 and Chevron’s own B19. By the end of 1970, the B16 FVC was fighting a rearguard action. It was still fast, still competitive, and undeniably the best-looking car on the grid, but the ruthless efficiency of the open-top spyder was taking over. Many B16 FVCs were eventually cut down into spyders to extend their racing lives, a tragic but necessary evolution in the pursuit of speed. 

Today, the Chevron B16 FVC is regarded as the ultimate iteration of Derek Bennett’s most famous creation. It represents the perfect balance of power and chassis, a car that didn’t have to rely on momentum like the FVA or durability like the BMW. It won on merit, speed, and handling. In modern historic racing, the FVC-powered B16 is the car to have, a screaming, sliding, glorious reminder of a time when a steel-framed car from Bolton, powered by a Ford engine, could take on the world’s best and look absolutely flawless doing it.

 

Read more

Brand

Chevron

Produced from

1969

Portal

Sports Cars

Vehicle category

Group 4, Group 6

Model line

Chevron B16

Predecessor

-

Sucessor

-

Brand

Chevron

Produced from

1969

Portal

Sports Cars

Vehicle category

Group 4, Group 6

Model line

Chevron B16

Model generation

-

Predecessor

-

Sucessor

-
About this submodel

If the Chevron B16 FVA was the sprint-specialist that stunned the world on its debut, and the B16 BMW was the endurance workhorse that could hammer through 24 hours, the Chevron B16 Ford Cosworth FVC was the perfection of the formula. It was the “Goldilocks” car, the machine that combined the lightweight, high-revving DNA of a purebred racing engine with the displacement necessary to fight for overall victories in the fiercely contested European 2.0-Litre Sports Car Championship. By late 1969 and early 1970, the 2.0-litre class had become the most vibrant battleground in motorsport. The factory Abarths were getting faster, and Lola was readying its new T210. Derek Bennett, Chevron’s visionary founder, knew that the 1.6-litre FVA, despite its brilliance, was giving away too much torque to the opposition. The answer came from Northampton, in the form of Cosworth’s latest masterpiece: the FVC. 

The technical specification of the B16 FVC represents the zenith of the coupé’s development. The chassis remained Bennett’s signature tubular steel spaceframe—stiff, repairable, and communicative—clothed in that impossibly beautiful, low-drag fibreglass bodywork by Specialised Mouldings. But the transformation happened behind the driver’s bulkhead. The Cosworth FVC (Four Valve Type C) was a direct evolution of the FVA, but crucially, it was designed specifically for sports car racing rather than Formula 2. Bored out to 1,790cc (and later stretched by engine builders to 1.9 or even a full 2.0 litres), the FVC retained the gear-driven cams and 16-valve architecture of its smaller sibling but added the one thing the B16 lacked: mid-range punch. Producing upwards of 235-245 bhp, it was lighter than the iron-block BMW M10 and torquier than the FVA. It was a chaotic, vibrating, aggressive engine that turned the B16 from a momentum car into a true weapon, capable of powering out of corners and screaming to 9,000 rpm on the straights. 

In the hands of privateers, the B16 FVC became the standard-bearer for British engineering in 1970. While the factory teams had unlimited budgets, a well-sorted B16 FVC run by a team like Red Rose Racing or Worcester Racing could turn up at any circuit in Europe and challenge for the win. The car was particularly effective on the fast, flowing circuits that rewarded its aerodynamic efficiency and the FVC’s top-end power. At tracks like Thruxton, Spa-Francorchamps, and the Österreichring, the B16 FVC was a formidable sight, often splitting the 3.0-litre prototypes and embarrassing the heavier GT cars. It offered a driving experience of pure, unadulterated intensity; the solid-mounted Cosworth engine turned the cockpit into a resonating chamber of noise and vibration, connecting the driver directly to the machine’s mechanical soul. 

However, the B16 FVC also marked the end of an era. Even as it was winning races and hearts, the physics of motorsport were shifting. The FVC engine was potent, but it was expensive to run and rebuild compared to the BMW units. Furthermore, the weight penalty of the B16’s stunning coupé roof—some 40kg compared to an open car—was becoming a liability against the new generation of “barchetta” prototypes like the Lola T210 and Chevron’s own B19. By the end of 1970, the B16 FVC was fighting a rearguard action. It was still fast, still competitive, and undeniably the best-looking car on the grid, but the ruthless efficiency of the open-top spyder was taking over. Many B16 FVCs were eventually cut down into spyders to extend their racing lives, a tragic but necessary evolution in the pursuit of speed. 

Today, the Chevron B16 FVC is regarded as the ultimate iteration of Derek Bennett’s most famous creation. It represents the perfect balance of power and chassis, a car that didn’t have to rely on momentum like the FVA or durability like the BMW. It won on merit, speed, and handling. In modern historic racing, the FVC-powered B16 is the car to have, a screaming, sliding, glorious reminder of a time when a steel-framed car from Bolton, powered by a Ford engine, could take on the world’s best and look absolutely flawless doing it.

 

Read more

Tech Specs

Discover the technical specifications
Full model list

Tech Specs

Discover the technical specifications

Engine

01

03

Internal combustion engine

Configuration

Ford Cosworth FVC, Inline-4

Location

Mid, longitudinally mounted

Construction

Cast iron block, aluminium alloy head

Displacement (cc)

1,790 cc

Displacement (cu in)

109.2 cu in

Compression

-

Bore x Stroke

85.7 mm x 77.5 mm

Valvetrain

4 valves per cylinder, DOHC

Fuel feed

Lucas Fuel Injection

Lubrication

Dry sump

Aspiration

Naturally aspirated

Output

Power (hp)

235 hp

Power (kW)

175 kW

Max power at

8,750 RPM

Torque (Nm)

-

Torque (ft lbs)

-

Max torque at

-

Drivetrain

02

03

Chassis

Type

Tubular frame

Material

Duraluminium and steel

Body

Material

Fibreglass

Transmission

Gearbox

5-speed manual

Drive

Rear Wheel Drive

Suspension

Front

Double wishbones, coil springs over dampers, anti-roll bar

Rear

Reversed lower wishbones, top links, twin trailing arms, coil springs over dampers, anti-roll bar

Steering

Type

Rack and pinion

Brakes

Front

Discs

Rear

Discs

Wheels

Front

-

Rear

-

Tires

Front

-

Rear

-

Dimensions and performance

03

03

Dimensions

Lenght (mm)

3,937 mm

Lenght (in)

155 in

Width (mm)

1,778 mm

Width (in)

70 in

Height (mm)

940 mm

Height (in)

37 in

Wheelbase (mm)

2,362 mm

Wheelbase (in)

93 in

Weight (kg)

-

Weight (lbs)

-

Performance

Power to weight

-

Top speed (km/h)

-

Top speed (mph)

-

0-100 km/h (0-60 mph)

-

Submodels

Other variants of this model
Full model list

Submodels

Other variants of this model

Lola B98/10 Ford 6.0L V8 'Roush'

Lola T70 Mk III Chevrolet 5.7L (350) V8 Coupe

Lola T70 Mk III Chevrolet 5.7L (350) V8 Spyder

Lola T70 Mk II Chevrolet 5.9L (359) V8 Spyder

Lola T600 Chevrolet Small Block 5.7L (350) V8 Coupé

Lola T298 BMW M12/7

Lola T290 Ford Cosworth FVC

Lola T286 Ford Cosworth DFV

Lola T280 Ford Cosworth DFV

Lola T212 Ford Cosworth FVC

© 2016-2026 Colabrio. All rights reserved | Purchase
Security | Privacy & Cookie Policy | Terms of Service